SRICO Drier in Chemical, Pharmaceutical Food
Dyestuff, Engineering, Sugar, Oil Mills, Plastic Industries etc. Construction:
Double walled construction with rigid frame work and having insulated with Glasswool. Fresh air inlet and suitable exhaust will be provided. The interior will be finished with heat resistant Aluminium and outside with hammertone and Black Borders. Heating Element:
Heating is accomplished by totally enclosed strip Heaters made out of imported BDH Nichrome wire provided on the sides of the inner chamber to obtain maximum temperature. Air Circulation:
In order to obtain temperature specially designed. Air Circulation Fans are fitted on the side of the unit. The design of the fans are such that the unit will such the hot air to pass over the trays ands and throw it on the sides where they will be reheated, and recireulated to continue the cycle. A part of the air is come out to threw the moisture.
12 Trays – 1 Fan Fan motor 1 x 0.25 1 Phase
24 Trays – 2 Fan Fan motor 1 x 0.50 3 Phase
48 Trays – 1 Fan Fan motor 1 x 1.00 3 Phase
96 Trays – 2 Fan Fan motor 1 x 1.00 3 Phase Control:
The fan motor is controlled by a starter and the working of the fan indicated by pilot lamps. The temperature inside the chamber is controlled by a thermostat and indicated by a Dial Thermo Meter. An indicating pilot lamp is also provided to single working of the drier. The heater circuit will be interlocked with the circulation fan so that the heaters are not energized with out the circulation fan being ‘ON’ which in turn will protect the heaters. Size of Trays will be 32” x 16” x 1 ¼ Material of construction may be aluminium or stainless steel. Wire mesh trays of size 32” x 16” can also be supplied. Trays could be supplied at the extra cost noted under accessories.
Suitable Trally can be supplied at extre cost. No tralley is required for the tray drier of 12 & 24 test models. For 48 numbers. Model 1 Trolley is needed for 96 numbers Trolley required.